3 Series E46 M3 (S54) COUPE
Reinstalling removed SAC clutch and clutch plate:
Set SAC clutch (1) down on a clean surface.
Install special tool 21 2 180 in SAC clutch (1).
Note:
Locking hooks (1) of special tool 21 2 180 must engage in
openings in SAC clutch.
Press special tool 21 2 180 together at handles (1) as far as it
will go and grip firmly.
At same time tighten down knurled screws (2).
Adjustment ring of SAC clutch is now secured in its original
position (wear position).
Important!
Do not reset adjustment ring to new position.
RA Removing and installing or replacing clutch
BMW AG - TIS
16.02.2013 15:00
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 3 -