3 Series E46 M3 (S54) COUPE
Installation:
Remove release unit and release lever and clean.
Installation:
Check lubrication of transmission input shaft for sticky
consistency. If grease is sticky, replace clutch plate.
Check clutch plate for friction rust in taper splines and replace
if necessary.
Mechanically remove old grease and lining abrasion from the
taper splines of the clutch disk (with a cloth).
RA Removing and installing transmission (S6S 420G SMG)
BMW AG - TIS
16.02.2013 15:22
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 6 -