bmw Workshop Repair Guides

BMW Workshop Service and Repair Manuals

4 RA Removing And Installing_replacing Windshield Washer Pump (M3) > < 2 RA Replacing Fluid Reservoir For Windshield Washer System (M3, M3 CSL)
Page 1
background image

61 71 062

Replacing fluid reservoir for windshield
washer system (M3 / lightweight bumper)

Drain fluid reservoir for windshield washer system.

Remove front bumper trim.

Remove level switch for windshield washer system.

Detach windshield washer pump from fluid reservoir for windshield
washer system and place to one side.

If necessary, detach washer pump of headlight cleaning system
from fluid reservoir for windshield washer system and place to one
side.

Detach hose (1) and filler duct (2) from fluid reservoir for
windshield washer system (4).

If necessary, unhook wire harness from bracket on fluid reservoir
for windshield washer system (4).

Release screws (3) and remove fluid reservoir for windshield
washer system (4) in direction of arrow.

Installation:

Make sure hoses are laid without kinks.

RA  Replacing fluid reservoir for windshield washer system (M3 / lightweight bumper)

BMW AG - TIS

16.02.2013  23:43

Issue status (12/2007) Valid only until next DVD is issued

Copyright

Page  - 1 -

4 RA Removing And Installing_replacing Windshield Washer Pump (M3) > < 2 RA Replacing Fluid Reservoir For Windshield Washer System (M3, M3 CSL)