3 Series E90 320Si (N45) SAL
Coat new valve stem seal (2) with oil and install.
Push fitting aid (1) onto valve.
Fit new valve shaft seal (2) over fitting aid (1) on valve.
Remove fitting aid (1).
Press on valve stem seal with special tool 11 2 200 by hand
up to stop.
Assemble engine.
RA Replacing all valve stem seals - cylinder head removed (N45)
BMW AG - TIS
28.01.2013 07:04
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -