3 Series E90 325xi (N52) SAL
25 16 056
Removing and installing or replacing shift
tower (Steptronic)
Necessary preliminary tasks:
•
Remove rear underbody protection.
•
Remove centre console.
Note:
Version 1:
Move selector lever to parking position "P".
Grip clamping sleeve (1) and slacken nut (2).
Installation:
Adjust selector lever.
Note:
Version 2:
Grip clamping sleeve (1) and slacken nut (2).
Detach retainer (3) downwards using a screwdriver.
Pull cable (4) out of holder.
Installation:
Adjusting shift lever
Note:
Version 3:
Move selector lever to "P" position.
Release screw (1).
Tightening torque 25 16 2AZ.
Remove clamp (2).
Release shift cable head (3) using a screwdriver from ball head
of shift cable lever.
Installation:
RA Removing and installing or replacing shift tower (Steptronic)
BMW AG - TIS
11.02.2013 13:14
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -