3 Series E90 325xi (N52) SAL
35 11 000
Removing and installing complete bearing
block for foot pedal
Necessary preliminary tasks:
•
Remove clutch pedal.
Release screws (1) and gently press clutch master cylinder (2)
to one side.
Installation:
Line remains connected.
Replace self-locking nuts.
Tightening torque 21 52 4AZ
.
Disconnect plug connection (1).
Remove locking clip (2) and pull out pin.
Unscrew nut (3).
Release nuts (4) and gently swivel bearing block to left and
remove.
Installation:
Tighten nuts (4) before nut (3).
Replace self-locking nuts.
Tightening torque 35 11 1AZ
.
RA Removing and installing complete bearing block for foot pedal
BMW AG - TIS
11.02.2013 16:25
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -