3 Series E90 325xi (N52) SAL
Installation:
If necessary, lever out clips (1) remaining in bore.
If necessary, replace faulty clip (1).
Make sure guides (3) of trim for front roof pillar (2) are correctly
seated in associated mountings.
Position trim for front roof pillar (2) preassembled with clip (1) on
associated bore and clip into place.
RA Removing and installing/replacing panel for roof pillar at front (A-pillar), lef
BMW AG - TIS
11.02.2013 19:38
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -
