3 Series E90 M3 (S65) SAL
Note:
Replace cylinder head gasket.
Check cylinder head for water leaks.
Installation:
Fit new cylinder head screws.
Tighten down cylinder head bolts from inside to outside in
sequence (1 to 10).
Tightening torque: 11 12 1AZ
.
Insert bolts (1).
Assemble engine.
RA Removing and installing left cylinder head (S65)
BMW AG - TIS
22.02.2013 10:08
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 3 -