3 Series E90 M3 (S65) SAL
11 12 106
Removing and installing right cylinder head
(S65)
Special tools required:
•
11 2 250
•
11 5 290
Necessary preliminary tasks:
•
Remove exhaust system.
•
Remove right exhaust manifold.
•
Remove right cylinder head cover.
•
Remove right inlet camshaft.
•
Remove right exhaust camshaft.
•
Partially unfasten engine wiring harness and lay to one side.
•
Remove throttle valves from cylinders 1 to 4.
•
Remove thermostat housing.
•
Remove rear water pipe from cylinder head.
Release screws (1).
Remove coolant fitting (2).
Installation:
Replace seal.
RA Removing and installing right cylinder head (S65)
BMW AG - TIS
22.02.2013 10:08
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
