3 Series E90 M3 (S65) SAL
13 62 531
Replacing coolant temperature sensor (S65)
Necessary preliminary tasks:
•
Read out fault memory of DME control unit; if necessary,
work through test schedules
•
Switch off ignition
•
Remove intake air manifold
Unlock plug and remove
Remove temperature sensor.
Installation:
Tightening torque, 13 62 1AZ
Note:
Now clear the fault memory.
RA Replacing coolant temperature sensor (S65)
BMW AG - TIS
22.02.2013 11:21
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -