3 Series E91 320i (N43) TOUR
34 41 220
Removing and installing/replacing all
handbrake shoes
Special tools required:
•
32 1 030
•
34 4 000
Necessary preliminary tasks:
•
Remove rear brake disk
Release handbrake lever.
Lock adjuster unit (ASZE).
Using special tool 32 1 030 , press stop (1) of adjusting spring
back to such an extent that retaining hook (2) engages in
stop (1).
Installation:
Unlock adjuster unit (ASZE).
Lever out restraining hook (2) with a suitable screwdriver.
Restraining hook (2) must detach from stop (1) of adjusting
spring.
Disconnect return spring (1) with brake spring pliers.
Installation:
Check and if necessary replace return spring (1).
Pay attention to installation position of adjustment screw (2).
Apply a thin coat of grease to bush and screw threads.
RA Removing and installing/replacing all handbrake shoes
BMW AG - TIS
24.01.2013 11:16
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -