3 Series E91 320i (N43) TOUR
![background image](/bmw/3_Series_E91/320i_N43_TOUR/page-618002.png)
Disconnect return spring (1) with brake spring pliers.
Installation:
Check and if necessary replace return spring (1).
Turn clamping pins (1) with special tool 34 4 000 through 90
°
and disconnect.
Remove brake shoes (2).
After installation:
•
Adjust handbrake
RA Removing and installing/replacing all handbrake shoes
BMW AG - TIS
24.01.2013 11:16
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -