3 Series E92 316i (N43) COUPE
11 31 025
Removing and installing/replacing inlet
camshaft (N43)
Special tools required:
•
11 4 480
•
11 8 691
Necessary preliminary tasks:
•
Remove cylinder head.
•
Remove inlet and exhaust adjustment unit.
Remove special tool 11 8 691 of inlet camshaft.
Release banjo bolts (2).
Tightening torque: 11 12 11AZ
.
Unclip oil line for lubricating inlet camshaft at retaining clips.
RA Removing and installing/replacing inlet camshaft (N43)
BMW AG - TIS
20.01.2013 10:03
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
