3 Series E92 320i (N46T) COUPE
Release screws.
Tightening torque, 24 00 1AZ
.
Installation:
Bore (1) in driving disk must be accessible from opening on
engine oil pan.
Check that dowel sleeves are correctly seated.
Replace damaged dowel sleeves.
Installation:
Rotate torque converter until bore in torque converter is flush with
bore in driving disk.
Flange automatic transmission to engine.
RA Removing and installing automatic transmission (GA6L45R) N45T, N46T
BMW AG - TIS
22.01.2013 13:59
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 6 -