3 Series E92 M3 (S65) COUPE
11 12 005
Removing and installing/sealing left cylinder
head cover (S65)
Important!
Magnesium material.
No steel screws/bolts may be used due to the threat of
electrochemical corrosion.
A magnesium material requires aluminium screws/bolts
exclusively.
Aluminium screws/bolts must be replaced each time they are
released.
The end faces of aluminium screws/bolts are painted blue for the
purposes of reliable identification.
Jointing torque and angle of rotation must be observed without fail
(risk of damage).
Scratching of the cylinder head cover is not permitted (risk of
corrosion).
Necessary preliminary tasks:
•
Remove intake air manifold.
•
Remove rod-type ignition coils.
•
Disconnect plug connection at camshaft sensors.
Release bolts along line (1).
RA Removing and installing/sealing left cylinder head cover (S65)
BMW AG - TIS
21.02.2013 18:12
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -