3 Series E92 M3 (S65) COUPE
Remove cable tie in cable duct.
Remove cable insert (1) and open.
Important!
Pay attention to order of leads during assembly.
Cut leads for intake air temperature sensor according to repair kit
and strip insulation. Connect repair kit leads using cable
connectors and shrink-fit hose with 61 4 328 and 61 4 321 .
Insert wiring harness in cable duct and secure with cable tie.
Close cable duct again.
Assemble engine.
Check DME fault memory.
RA Replacing plug-in contact for intake air temperature sensor (S65)
BMW AG - TIS
21.02.2013 19:26
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -