3 Series E92 M3 (S65) COUPE
13 62 602
Replacing pulse generator on right inlet
camshaft (S65)
(cylinder bank 1 to 4)
Necessary preliminary tasks:
•
Read out fault memory of DME control unit; if necessary,
work through test schedules
•
Switch off ignition
•
Release and raise coolant expansion tank. Do not kink
hoses.
•
Remove right ignition coil cover
Release plug connector (1) and pull off.
Release screw.
Remove pulse generator (2).
Installation:
Replace sealing ring and coat with antiseize agent.
Tightening torque, 13 62 5AZ
Note:
Now clear the fault memory.
RA Replacing pulse generator on right inlet camshaft (S65)
BMW AG - TIS
21.02.2013 19:46
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -