3 Series E93 325d (M57T2) CONVER
Release Torx screw (1) of reversing lugs for tensioning cable on
left and right of roof shell at rear.
Tightening torque: 54 37 15AZ
.
Release Torx screw (1) for fastening tensioning cable on left and
right of convertible top frame.
Tightening torque: 54 37 16AZ
.
Note:
Convertible top compartment lid opened.
Using special tool 00 4 430 , release Torx screw from
tensioning cable mounting on main bearing.
Tightening torque: 54 37 16AZ
.
Detach rubber protective sleeve (1) from spring on tensioning
strap (2).
RA Removing and installing or replacing roofliner for roof shell in middle
BMW AG - TIS
26.01.2013 10:28
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 3 -