5 Series E34 518g (M43) TOUR
13 82 520
Removing and installing/replacing CNG MAP
sensor (E34)
Interrogate fault memory of CNG control unit.
Switch off ignition.
Pull off vacuum hose (3). Unfasten interlock on connector (2) and
remove connector. Unfasten hex screw and remove MAP sensor
(1).
Tightening Torque, refer to
Technical Data 13 82 1AZ
Installation:
Cancel fault memory of CNG control unit to disconnect control
unit from power supply.
RA Removing and installing/replacing CNG MAP sensor (E34)
BMW AG - TIS
15.01.2013 13:18
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
