bmw Workshop Repair Guides

BMW Workshop Service and Repair Manuals

21 RA Removing And Installing_replacing CNG Filler Connection (E34)|Page 545 > < 20 RA Replacing CNG Gas Density Sensor
Page 1
background image

13 85 500

Removing and installing/replacing CNG filler
connection (E34)

Drain CNG system,

refer to section on draining the CNG system

Remove rear left side trim from luggage compartment.

Unfasten nut (1), remove cover (2) and place to one side.

Unfasten hose clip (1) and pull back hose sheath.

Unfasten Swage-Lok connection (1), bracing hex head (2) with
open-end wrench.

Installation:

Tightening Swage-Lok connections,

refer to opening/closing Swage-Lok connection.

RA  Removing and installing/replacing CNG filler connection (E34)

BMW AG - TIS

15.01.2013  13:19

Issue status (12/2007) Valid only until next DVD is issued

Copyright

Page  - 1 -

21 RA Removing And Installing_replacing CNG Filler Connection (E34)|Page 545 > < 20 RA Replacing CNG Gas Density Sensor