5 Series E34 518g (M43) TOUR
Unfasten hex screw (1).
Tightening Torque, refer to
Technical Data 13 83 4AZ
Unfasten hex nuts (1/2) and remove bracket.
Note:
Do not unfasten Swage-Lok connection (1) and replace
complete filler connection (2) with line.
Installation:
Only replace complete filler connection (1) with leak-tested
line. Fit filler connection gasket (2).
RA Removing and installing/replacing CNG filler connection (E34)
BMW AG - TIS
15.01.2013 13:19
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -