5 Series E34 525td (M51) TOUR
11 23 031
Replacing hub in vibration damper (M51)
Remove vibration damper,
refer to 11 23 010.
Block engine with special tool 11 2 150.
Unscrew central bolt.
Remove disk with hub.
Replace crankshaft radial seal,
refer to 11 14 141.
Installation:
Position hub in such a way that groove and woodruff key are
aligned.
Shoulder of washer faces hub.
Replace central screw.
Tightening Torque,
refer to Technical Data 11 23 2AZ.
RA Replacing hub in vibration damper (M51)
BMW AG - TIS
23.01.2013 06:38
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -