5 Series E34 525td (M51) TOUR
Caution!
Incorrect removal/installation without help of fixture could
damage or break the camshaft.
In addition, valves can be distorted through contact with the
piston base while the cylinder head is being fitted to the
crankcase.
Always conform with procedures and sequence.
Fit Special Tool 11 3 330 to cylinder head.
Secure fixture with valve cover screws.
Apply pressure on bearing caps by turning the eccentric shaft.
Unscrew all bolts for bearing caps.
Installation note:
For tightening torque, refer to Technical Data 11 31 1AZ
RA Replacing camshaft (M51)
BMW AG - TIS
23.01.2013 06:42
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -
