5 Series E34 525td (M51) TOUR
Install bearing pin (3) for locking lever.
This requires turning the transmission until bore (4) in the locking
lever is aligned with the bore in the case.
In this position, turn the bearing pins (3) by hand and secure.
Tightening torque, 23 31 1AZ.
Coat collar of screw head with sealing compound, refer to BMW
Parts Service.
Install screw (1) for reverse gear pin with screw retaining
compound, refer to BMW Parts Service.
Tighten both screws.
Tightening torque, 23 11 6AZ.
Install catch pins (1 ... 3) with pressure springs in shift arms.
Drive in sealing caps (5 ... 7) with special tool 23 2 360 .
RA Removing and installing complete drive and output shafts (S5D 260Z / 310Z / 320Z
BMW AG - TIS
23.01.2013 07:11
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 16 -
