5 Series E34 525td (M51) TOUR
Slacken nut (1).
Caution!
Always brace bolt with special tool 24 5 210 to avoid
deformation of the cable.
Note:
Special tool 24 5 210 can only be fitted in position "P".
Unscrew cable from holder.
Pull out cable.
Tightening torque,
refer to Technical Data 25 16 2AZ.
Installation:
Adjusting shift mechanism,
refer to 24 00 007.
Turn bayonet lock (1) counterclockwise.
Pull off plug (2).
Lift wire harness out of holder.
Installation:
Connect plug (2) so that marks (3) are aligned.
Lift wire harness on transmission out of holder.
Remove the oxygen-sensor plug (1) from its holder.
RA Removing and installing automatic transmission (A5S 310Z)
BMW AG - TIS
23.01.2013 07:16
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 3 -
