5 Series E34 525td (M51) TOUR
24 11 575
Removing and installing/sealing converter
bell housing (A4S 270R/310R)
(transmission removed)
Secure transmission to assembly frame with special tool
24 0 150 / 154 / 155.
Drain off transmission oil.
Screw special tool 24 4 000 into torque converter and remove
torque converter.
Installation:
Insert torque converter through sealing ring to first limit
position on the transmission shaft.
Press torque converter into bell housing by hand and rotate
until recess in converter hub locates in driver of impeller and
torque converter slides in perceptibly.
The torque converter is correctly installed when the gap
between surface of threaded bore on torque converter and
locating face of bell housing is approx. 31 mm.
RA Removing and installing/sealing converter bell housing (A4S 270R/310R)
BMW AG - TIS
23.01.2013 07:19
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
