5 Series E34 525td (M51) TOUR
Unfasten nut (1) and pull shift lever (2) off manual shift valve shaft.
Installation:
Replace self-locking nut (1).
Tightening Torque,
refer to Technical Data 24 51 1AZ.
Screw special tool 24 5 361 into radial sealing ring.
Screw special tool 24 5 362 onto 24 5 361 and tighten to pull
radial sealing ring out of transmission housing.
Fit special tool 24 5 365 on the manual shift valve shaft.
Moisten sealing lips of radial sealing ring (1) with automatic
transmission fluid.
Push radial sealing ring (1) onto manual shift valve shaft and
press into transmission housing as far as possible.
Hold radial sealing ring (1) in place and pull special tool
24 5 365 off manual shift valve shaft.
RA Replacing radial sealing ring for manual shift valve shaft (A4S 270R/310R)
BMW AG - TIS
23.01.2013 07:20
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -
