5 Series E34 525td (M51) TOUR
24 12 505
Replacing radial seal for torque converter -
transmission removed (A4S 270R/ 310R)
Carefully remove torque converter from oil pump with special tool
24 4 000 (assembly handles).
Important!
Escaping ATF.
Unscrew Torx bolts with a Torx socket.
Extract radial seal with special tool 00 5 010 (extractor).
Place a suitable pressure piece (1) on the input shaft on which the
pressure bolt can bear.
Lubricate sealing lip with ATF.
Install radial oil seal.
Tightening torque 3 Nm.
RA Replacing radial seal for torque converter - transmission removed (A4S 270R/ 310
BMW AG - TIS
23.01.2013 07:21
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
