5 Series E34 525td (M51) TOUR
Apply special tool 24 1 180 and clamp tight on converter support
shaft.
The oil pump housing is pressed out by turning spindle (1) in.
Lift out oil pump housing.
Remove special tool 24 1 180.
Lift out radial oil seal (2).
Lubricate sealing lip of radial oil seal with ATF.
Install radial oil seal (2) with special tool 24 0 110 in conjunction
with supplementary ring 24 0 111 until firmly seated.
Depth of recess 1 mm.
Replace round seal (3).
RA Removing and installing / sealing oil pump housing (A5S 310Z)
BMW AG - TIS
23.01.2013 07:27
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -