5 Series E34 525td (M51) TOUR
Check for correct installed position of thrust washer (4), needle
bearing (5) and thrust washer (6) before installing the oil pump
housing.
Coat O-ring with ATF oil.
Mount oil pump housing.
Check self-made marks.
Fit the screws with new sealing rings (1).
Bolt oil pump housing to transmission case by tightening the bolts
uniformly.
Tightening torque, refer to Technical Data 24 31 3AZ
RA Removing and installing / sealing oil pump housing (A5S 310Z)
BMW AG - TIS
23.01.2013 07:27
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 3 -
