5 Series E34 525td (M51) TOUR
24 31 571
Replacing oil pump housing
Remove and install or replace torque converter,
refer to 24 40 006
Arrangement of oil pump housing.
Bolt transmission to special tool 24 0 181 with 24 0 184 and 24 0
185 and secure to assembly jig 00 1 490.
Set transmission upright.
To make it easier to locate threaded bores during assembly, mark
out installation position of oil pump housing and transfer these
marks to the new oil pump housing.
Unscrew bolts.
Caution!
Watch out for seals (1).
RA Replacing oil pump housing
BMW AG - TIS
23.01.2013 07:28
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -