5 Series E34 525td (M51) TOUR
Installation:
Coat seals with grease (Vaseline).
Press in solenoid valve as far as stop.
b) Solenoid valve (33) 1./2. and 3./4. gear
Pry off plug (1) with a screwdriver.
Do not pull off plug on wires.
Pull out pin (2) (use snippers).
Installation:
Replace pin (2).
Pin must protrude about 5 mm.
Pull or press (use screwdriver) out solenoid valve.
Installation:
Coat seals with grease (Vaseline).
Press in solenoid valve as far as stop.
c) Solenoid valve, brake band (29)
removing oil screen, refer to 24 31 155
Pry off plug (1) with a screwdriver.
Do not pull off plug on wires.
Press in solenoid valve - light spring pressure - and pull out
pin (2) by hand or with a pliers if necessary.
RA Replacing all solenoid valves (A4S 270R/ 310R)
BMW AG - TIS
23.01.2013 07:29
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -
