5 Series E34 525td (M51) TOUR
Pull out solenoid valve.
Watch out for corrugated washer (3).
Installation:
Coat seals with grease (Vaseline).
Install solenoid valve that groove (4) is aligned with bore (5).
Press in solenoid valve that pin (2) can be inserted.
d) Solenoid valve (38) converter clutch
Pry off plug (1) with a screwdriver.
Do not pull off plug on wires.
Remove screw (2).
Caution!
Inch threads.
Pull or press (use screwdriver) out solenoid valve.
Installation instructions:
Coat seals with grease (Vaseline).
Press in solenoid valve up to stop and secure.
Tightening Torque,
refer to Technical Data 2AZ.
RA Replacing all solenoid valves (A4S 270R/ 310R)
BMW AG - TIS
23.01.2013 07:29
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 3 -
