5 Series E34 525td (M51) TOUR
24 61 501
Removing and installing or replacing control
unit
The control unit for EGS is located in the engine compartment on
the right-hand side wall.
Raise engine hood.
Interrogate and print fault memory prior to removal.
Version with insulating cover:
Unscrew insulating cover from separating wall.
Unscrew cover.
Press EGS control unit down off of spring retainers (1 and 2).
Pull out control unit forward through the opening.
RA Removing and installing or replacing control unit
BMW AG - TIS
23.01.2013 07:37
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -