5 Series E34 525td (M51) TOUR
- a
0,20 mm
Thickness of shim (X)
3,90 mm
If C nominal is greater than C actual, "a" is subtracted from
thickness of shim (X).
Example II:
C
11,50 mm
e -
0,10 mm
C nominal
11,40 mm
Y measured on dial gage
2,20 mm
+ master disc thickness
9,50 mm
C actual
11,70 mm
C nominal
11,70 mm
RA Replacing input bevel gear and crown wheel (Type M) - final drive housing remove
BMW AG - TIS
23.01.2013 07:44
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 8 -
