bmw Workshop Repair Guides

BMW Workshop Service and Repair Manuals

3 SBT Run Flat Indicator All Models|Page 2249 > < 3 SBT Run Flat Indicator All Models|Page 2247
Page 4
background image

Computer 

M-ASK or CCC or CHAMP (multimedia platform: CHAMP; Central Head Unit and Multimedia Platform) issues an
acoustic warning through the loudspeakers if the tyre pressure should drop. 

(On vehicles without M-ASK or CCC or CHAMP, the instrument cluster will emit the warning.)

SGM: Safety and gateway module 

> E60, E61, E63, E64 up to 09/2005

> E65, E66 from 03/2004

The SGM is the data interface (= gateway) between the K-CAN, byteflight and the PT-CAN. 

SZL: Steering column switch cluster 

> E87, E90, E91, E92, E93, R56

The signals from the on-board computer button and from the rocker switch are recorded and processed in the
SZL. The data is transmitted to the instrument cluster (on-board computer).

ZGM: Central gateway module 

> E65, E66 until 03/2004

The ZGM forms the data interface (= gateway) between the K-CAN and the PT-CAN.

KOMBI and CID: Instrument cluster and Central Information Display

A fault in the RPA or drop in tyre pressure will be indicated by the RPA indicator and warning light in instrument
cluster.

At the same time, the symbol will light up in the LCD display.

Faults registered by the RPA are indicated as follows by the RPA indicator and warning light (for variations,
please refer to national version):

The RPA indicator and warning light lights up:

Red (with acoustic signal):

Drop in tyre pressure more than approx. 30 % 

±

 10 %. 

Driving safety is no longer guaranteed.

Yellow: 

RPA failed

Information about the check control message can be called up in the CID (CID is fitted depending on the
vehicle's equipment).

[more ...]

System functions

The Run Flat Indicator (RPA) comprises the following functions:

Self-test

Initialisation

Detects drop in tyre pressure

Visual and acoustic warning

Actively reduce the load on the defective wheel (E70 only)

Self-test

The RPA performs a self-test when terminal 15 is switched ON. A fault in the RPA is indicated by the RPA
indicator and warning light and by a symbol in the LCD display.

SBT  Run Flat Indicator All models

BMW AG - TIS

23.01.2013  11:53

Issue status (12/2007) Valid only until next DVD is issued

Copyright

Page  - 4 -

3 SBT Run Flat Indicator All Models|Page 2249 > < 3 SBT Run Flat Indicator All Models|Page 2247