bmw Workshop Repair Guides

BMW Workshop Service and Repair Manuals

15 RA Opening Plug Housings And Removing Contacts Of Different Plug Systems|Page 1076 > < 15 RA Opening Plug Housings And Removing Contacts Of Different Plug Systems
Page 2
background image

Manufacturer: AMP

Ultrasonic-welded connectors:

Ultrasonic-welded connectors (1) can be identified by the welds
(2) on their longitudinal side.

The contacts of these connectors cannot be replaced. The plug
must be replaced completely.

Note:

Special tools referred to in the repair instructions below are
contained in the following special tool kits:

Release and press-out tool
Replaced as from 09/2005 by:

61 1 150
 
61 0 300
61 0 400

Repair instructions for opening plug housings and removing contacts of different plug systems
For
 plug contact systems not listed, refer to Service Information:
SI 2 05 05 217
SI 2 05 06 294
SI 2 08 06 312

Plug system D 1.5/D 2.5:

Circular plugs, 7-, 8-pin, System D 2.5

Circular plugs, 13-pin, System D 2.5

Circular plugs, 20-pin, System D 2.5

Circular plugs, 4-, 7-, 10-, 12-, 25-pin, System D 1.5/D 2.5

In-line plugs, 15-pin, System D 2.5

In-line plugs, 8-, 12-pin, System D 2.5

In-line plugs, 30-pin, System D 2.5

RA  Opening plug housings and removing contacts of different plug systems

BMW AG - TIS

24.01.2013  12:00

Issue status (12/2007) Valid only until next DVD is issued

Copyright

Page  - 2 -

15 RA Opening Plug Housings And Removing Contacts Of Different Plug Systems|Page 1076 > < 15 RA Opening Plug Housings And Removing Contacts Of Different Plug Systems