5 Series E39 523i (M52TU) SAL
Single taper synchronization:
Position synchronizer ring (1).
Single taper synchronization:
Heat 1st/2nd gear guide sleeve to approx. 120
°
(hot air
blower).
Position the guide sleeve so that the detent lugs (1) point
towards the opening (3) of the guide sleeve (2).
Press guide sleeve (2) with special tool 23 1 290 until
secure.
While pressing, ensure that the detent lugs (1) catch in the
opening in the guide sleeve.
Insert 3 thrust pieces (1) with bevels outward and 3 (pressure)
springs (2) in guide sleeve opening.
Double taper synchronization:
Position sliding sleeve (1).
RA Detaching and mounting all synchronizing devices S5D 200G/250G
BMW AG - TIS
14.02.2013 13:56
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 6 -