5 Series E39 525d (M57) SAL
Installation:
Observe installation position of pedal travel sensor (3).
Note lever position (1 and 2).
Installation:
Note installation position of bracket (1) with weld-in nuts.
Perform function check:
Connect DIS or MoDiC.
Select diagnostic program of DDE control unit.
Check function of pedal travel sensor (function test).
Read fault memory. To proceed, follow DIS or MoDiC instructions.
Check stored fault messages.
Rectify faults and clear fault memory.
RA Removing and installing/replacing pedal travel sensor (M47, M57 and M67)
BMW AG - TIS
17.02.2013 19:25
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 3 -
