5 Series E39 525tds (M51) TOUR
![background image](/bmw/5_Series_E39/525tds_M51_TOUR/page-373003.png)
Installation:
Procedure: Connect up DIS and/or MoDiC and select
diagnosis program on DDE control unit, check function of
accelerator sensor (function test), interrogate fault memory,
subsequent procedure in accordance with DIS and/or MoDiC
instructions.
After completion of repair work, cancel the fault memory of the
DDE control unit.
RA Removing and installing/replacing accelerator sensor (M51)
BMW AG - TIS
20.02.2013 03:13
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 3 -