5 Series E39 525tds (M51) TOUR
Do not apply grease to brake pad backplate.
Check dust sleeve (1) for damage and replace if necessary.
Clean contact face (2) of brake piston and apply a thin coating of
anti-squeak compound.
Anti-squeak compound,
refer to BMW Service Operating Fluids.
Important!
Dust sleeve must not come into contact with anti-squeak
compound as this may cause the dust sleeve to swell.
Clean contact faces (1...2) of brake lining hammer heads/brake
caliper housing and coat with anti-squeak compound.
Anti-squeak compound,
refer to BMW Service Operating Fluids.
Note:
Grease contact surfaces on brake caliper at top and bottom.
Clean contact face (3) of brake caliper and apply a thin coating of
anti-squeak compound.
Anti-squeak compound,
refer to BMW Service Operating Fluids.
Clean contact face of brake caliper mounting bracket and apply a
thin coating of anti-squeak compound.
Anti-squeak compound,
refer to BMW Service Operating Fluids.
RA Removing and installing/replacing brake linings of both front disk brakes
BMW AG - TIS
20.02.2013 07:19
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 3 -