bmw Workshop Repair Guides

BMW Workshop Service and Repair Manuals

7 SI Steering Hydraulics Noises E39 _M52_right-hand Drive|Page 143 > < 6 SI Ignition Lock Spins Freely E31 E36 E38 E39
Page 1
background image

VK-21/Dick

Baugruppe/Group: 32

32 01 98 (280)

weltweit
all countries

01/1998

Steering hydraulics noises

E39 /M52/right-hand drive

Complaint: 

On some vehicles, complaints are made of a booming noise from the steering while
manoeuvring. This noise occurs when large movements of the steering wheel are made or
when the steering wheel is moved to full lock, and is most noticeable at higher
temperatures.

Cause: 

Pulsation noises from steering hydraulics.

Affected
vehicles:

E39/M52 right-hand drive
Manufacturing period: Start of series production up to July 1997

Remedy: 

In the event of a customer complaint, the pressure pipe, return pipe and cooler return pipe
should be renewed using the modified design.
The current design can be identified by the position of the pressure pipe behind the
steering box, viewed in the direction of travel.

Procedure:

Note:
Drain the hydraulic oil from the hydraulic tank. Do not reuse.
Bleed the power steering after assembly,

see Repair Instructions 32 13 006.

Renew the sealing rings and O-rings on all pipes opened.

Unfasten the cooler return pipe from
the oil tank.

Unfasten return pipe (arrow) and cooler
return pipe from the hydraulic cooler,
remove cooler return pipe.

SI  Steering hydraulics noises E39 /M52/right-hand drive

BMW AG - TIS

19.02.2013  23:48

Issue status (12/2007) Valid only until next DVD is issued

Copyright

Page  - 1 -

7 SI Steering Hydraulics Noises E39 _M52_right-hand Drive|Page 143 > < 6 SI Ignition Lock Spins Freely E31 E36 E38 E39