5 Series E39 528i (M52) SAL
Disconnect plug connection (1) on coolant temperature sensor.
Release nut (1) on line bracket.
Release nut (2) on line bracket (3) and remove line bracket (3).
Unfasten plug connection on oil level switch.
Remove wiring harness from timing case cover.
Installation:
Read fault memory of control units. Check stored fault
messages. Rectify faults. Now clear the fault memory.
RA Wiring harness - replacing engine section (M52)
BMW AG - TIS
21.02.2013 16:28
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 6 -