5 Series E39 528i (M52) SAL
Remove cover.
Release retaining screws of torque converter (3 x) with special
tool 24 1 110 .
Installation:
Only use original screws.
Tightening torque: 24 40 1AZ
.
Protect torque converter from slipping out. To do so, insert special
tools 24 4 131 and 24 4 133 in opening in transmission
housing.
Clamp torque converter.
Release screws.
Pull off transmission from engine towards rear and lower it.
Installation:
Tightening torque: 24 00 1AZ
.
RA Removing and installing automatic transmission (A4S 310R)
BMW AG - TIS
21.02.2013 18:07
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 6 -
