5 Series E39 528i (M52) SAL
24 12 105
Replacing radial seal for manual shift valve
shaft (A4S 270R)
Grip clamp bushing (1).
Loosen nut (2).
Disconnect cable.
Installation:
Adjust shift lever,
refer to 24 00 007.
Slacken nut (1).
Remove shift lever (2).
E39:
Remove position switch,
refer to 24 10 002.
Screw special tool 24 5 361 into radial sealing ring.
RA Replacing radial seal for manual shift valve shaft (A4S 270R)
BMW AG - TIS
21.02.2013 18:14
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
