5 Series E39 528i (M52) SAL
Screw special tool 24 5 362 on 24 5 361 and tighten down.
This pulls the radial seal out of the transmission housing.
Mount special tool 24 5 365 on the manual shift valve shaft.
Moisten sealing lips of radial sealing ring (1) with automatic
transmission fluid.
Push radial sealing ring (1) onto manual shift valve shaft and
press into transmission housing as far as possible.
Grip radial seal (1) firmly.
Pull special tool 24 5 365 off manual shift valve shaft.
Pull radial sealing ring into transmission housing up to stop with
special tool 24 5 370 and 24 5 364.
RA Replacing radial seal for manual shift valve shaft (A4S 270R)
BMW AG - TIS
21.02.2013 18:14
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -
