5 Series E39 528i (M52) SAL
Do not damage wheel arch - use protective cover (2).
Press swivel bearing down with a lever (1) (e.g. socket wrench
extension) until the spring strut shock absorber can be tilted
outwards from wheel arch.
If necessary, remove engine shielding.
Important!
Do not release spring strut from swivel bearing with rotary
motions.
With a screwdriver or pry bar, press spring strut shock absorber
out of swivel bearing.
Do not unfasten spring strut shock absorber from swivel bearing
with turning motion - this can cause damage (radial notches) to
the spring strut shock absorber.
Warning!
Prior to each use of the special tool 31 3 340 , it is essential
to read the associated Owner's Handbook fully!
All the safety precautions and instructions contained in the
Owner's Handbook must be strictly observed!
Failure to observe these safety precautions and instructions
increases the risk of serious physical injury, damage to your
health and damage to property and equipment!
RA Replacing front left or right spring strut (Basis)
BMW AG - TIS
21.02.2013 19:14
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 4 -
