5 Series E39 528i (M52) SAL
Important!
1.
Prior to each use, check the special tools for defects,
modifications and operational reliability.
2.
Damaged/modified special tools must not be used!
3.
No changes or modifications may be made to the special
tools!
4.
These special tools are intended solely for the purpose
of tightening and relieving cylindrical and tapered
suspension springs.
5.
Keep special tools dry, clean and (down to the spindle)
free from grease.
6.
Impact screwdrivers are prohibited!
7.
Do not compress coil spring to full extent.
Clamp special tool 31 3 341 at guide in vice.
Push in special tools 31 3 352 and 31 3 354 in each case
from chamfer end of special tool 31 3 341.
Locking pins must be felt and heard snapping into place.
Warning!
Prior to each use, check special tools for functional capability,
do not use damaged tools, do not make any modifications,
use only suitable spring retainers.
The special tools are solely intended for tensioning and
relieving the tension on suspension springs.
Never tighten or untighten the special tool with an impact
screwdriver.
Spring retainers must each be inserted from chamfer (1) of special
tool 31 3 341.
RA Replacing front left or right spring strut (Basis)
BMW AG - TIS
21.02.2013 19:14
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 5 -
