5 Series E39 528i (M52) SAL
33 32 071
Replacing one upper control arm
Remove wheel.
Unfasten nut (1) and remove screw (2).
Installation:
Replace nut.
Watch insertion direction of bolt (2):
Bolt head at front in driving direction.
Tightening torque 33 32 14AZ.
If necessary, open holder (1).
Unfasten nut - brace on hexagon if necessary and remove control
arm.
Installation:
Tapered pin and bore free of grease.
Replace nut.
Tightening torque 33 32 8AZ.
RA Replacing one upper control arm
BMW AG - TIS
21.02.2013 20:28
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
