5 Series E39 528i (M52) SAL
37 14 515
Replacing rear left or right ride-height sensor
Important!
Read and comply with notes on protection against
electrostatic damage (ESD protection).
After installation:
•
Check headlight adjustment, correct if necessary
•
Version with air suspension: Carry out ride-height calibration
Remove trim.
If necessary, remove height setting sensor and bracket.
Pull off plug (2).
Release nut (3) and disconnect control rack.
Release screws (1) and remove ride-height sensor.
Installation:
Lever (4) points outwards.
Tightening torque 37 14 6AZ/7AZ
.
RA Replacing rear left or right ride-height sensor
BMW AG - TIS
21.02.2013 21:59
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
